[Winpcap-bugs] Problem with AT&T MTS Client

[Gianluca Varenni]

Chris,

unfortunately I'm not surprised by this. I'm not familiar with this specific client, but several of these softwares basically operate below the WinPcap capture driver (usually using an NDIS Intermediate driver), and packets are not delivered to WinPcap for capture. And unfortunately at the moment there is no workaround for this problem (also considering that we do not have such client to make tests and understand exactly what's going on).

Have a nice day
GV
  ----- Original Message ----- 
  From: Chris C Taylor 
  To: winpcap-bugs 
  Sent: Thursday, September 18, 2008 11:28 PM
  Subject: [Winpcap-bugs] Problem with AT&T MTS Client



  Hi, 

  I am running the AT&T network client 6.9.0.3006 with WinPcap as you will see in the txt files - The issue I am having is that when I run Wireshark or any other sniffer, including Windump, I can see the packets going out, within the VPN,  but nothing comes back. I have turned off the FW software I run with the same effect. If I change to another VPN client I can capture traffic within the VPN. I have tried on older version of WinPcap and the latest Beta version with the same results. Within the AT&T client I am using the managed dual access SSL profile. 

  Just wondering if you have seen this before and if you have a work around. 




  Thanks

  Chris C Taylor
  Asia Pacific, IBM Global Account
  Infrastructure Architect.

  55 Coonara Ave
  West Pennant Hills
  NSW, 2125
  Phone (02) 9354 7573   Fax (02) 9354 4030  Home Office 61 2 4333 5034
  Mobile: 0411 138 636



------------------------------------------------------------------------------


  _______________________________________________
  Winpcap-bugs mailing list
  Winpcap-bugs at winpcap.org
  https://www.winpcap.org/mailman/listinfo/winpcap-bugs
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.winpcap.org/pipermail/winpcap-bugs/attachments/20080919/f2e9178d/attachment.htm