[Winpcap-users] Winpcap with 10GbE cards

Gianluca Varenni gianluca.varenni at cacetech.com
Mon Mar 2 15:25:16 PST 2009


It *should* work, but do not expect to transmit/receive at full speed (10Gbps) with WinPcap....

Have a nice day
GV


  ----- Original Message ----- 
  From: Joseph.Pathikulangara at csiro.au 
  To: winpcap-users at winpcap.org 
  Sent: Monday, March 02, 2009 2:37 PM
  Subject: [Winpcap-users] Winpcap with 10GbE cards


  Hi,



  I am currently sending and receiving raw packets (with valid destination/source MAC address and checksum) from a PC to a custom FPGA hardware on a 1GbE link using Winpcap.



  Would Winpcap work if I switch to 10GbE? (Using 10GbE card on PC directly connected to a matching PHY on the FPGA side)



  Thanks,



  Joseph





------------------------------------------------------------------------------


  _______________________________________________
  Winpcap-users mailing list
  Winpcap-users at winpcap.org
  https://www.winpcap.org/mailman/listinfo/winpcap-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.winpcap.org/pipermail/winpcap-users/attachments/20090302/fb7b212c/attachment.htm 


More information about the Winpcap-users mailing list